|
||||||||||||||||||||||
|
|
||||||||||||||||||||||
|
Busways,
Links to: Low
Voltage Collector Bus Low
Voltage (BD Style) |
||||||||||||||||||||||
| BusWays End Cable Tap Boxes |
||||||||||||||||||||||
![]() |
||||||||||||||||||||||
| End Cable Tap Boxes are attached to either or both ends of a plug-in duct run. They are used for cable or conduit tap-off or feed-in. It is recommended that duct sections be installed with the offset bus-bar ends to the right. When so installed, standard End Cable Tap Boxes may be used and if desired the duct can be mounted against a wall or other flat surface. End Cable Tap Boxes always have straight bus-bar ends so that they can be connected to the offset ends of duct bus bars without the use of Adapter Straps and Covers. When End Cable Tap Boxes are connected to the straight ends of duct bus-bars, Adapter Straps and Covers must always be used. When the duct sections are installed with the offset bus-bar ends to the left and End Cable Tap Boxes are used, the duct cannot be mounted against a wall or other flat surface. | ||||||||||||||||||||||
|
||||||||||||||||||||||
|
||||||||||||||||||||||
![]() |
||||||||||||||||||||||
|
||||||||||||||||||||||
|
||||||||||||||||||||||
|
Busways,
Links to: Low
Voltage Collector Bus Low
Voltage (BD Style) |
||||||||||||||||||||||
|
|
||||||||||||||||||||||
| © Copyright Miller Media, Inc. 2000 | ||||||||||||||||||||||